
Homeworks Corporation est 2004



1. Bake the membrane for 1000 hours with a UV lamp.
2. Place the weathered membrane between two ten wide pipes.
3. Fill the upper pipe with six inches (deep) water.
4. Let the water set on the membrane for seven days.
5. Close the top of the pipe off and then input pressure into the pipe multiple times
and at no time will the Hydro-





Like most of the “roof coatings” Hydro-
Description of the Premium Coat roof system
Statement of system integrity
1. The Hydro-
2. The system is a 100% acrylic resin system (with no styrene, butadiene or vinyl
additives). This non-
3. The reinforced (polyester fabric) system cures into a seamless monolithic single-
4. Metal flashing, fasteners or glues are not required to achieve I-
5. The system can encapsulate vertical and horizontal surfaces (walls, curbs, scuppers, drains, stairwells and elevator rooms, planters and other adjoining surface). All of these multiple areas can be incorporate into a single source warranty.
6. The Energy Star Approved and Cool Roof System has a Solar Reflectance greater than 0.90, and a Thermal Emittance greater than 0.79. Furthermore the system is compliant with OTC (Ozone Transport Commission), California Title 24 and the CRRC (Cool Roof Rating Council).
7. The roof system and warranty are sustainable, indefinitely for the life of the building.
1. The Premium Coat system is tested, listed and approved by Factory Mutual as a Class I, FM 4470 Roof/Waterproofing System.
2. The FM classification identifies this system as a “stand alone” waterproofing system.
3. The FM Class I 4470 Classification verifies that this system has passed these tests:
• Class A Fire Rating ASTM E 108.
• Susceptibility to Leakage: No signs of water leakage.
• Windstorm Pressure: Meets Class 1-
• Windstorm Pull: Class 1-
• Severe Hail Test: No separation or rupture 1-
• Resistance to Foot Traffic: No sign of tearing or cracking with 200 pound dragged on a metal plate.
4. The Premium Coat system has also been tested to survive tropical weather as an approved Miami Dade
Hydro-
1. Environmentally safe.
2. Sustainable roofs that can last the life of the building.
3. Able to withstand tropical weather.
4. Hurricane force wind resistant.
5. Easy to maintain and repair.
6. Available in a wide range of colors.
7. Listed as a Cool Roof system and is eligible for LEED points.
8. Able to waterproof multiple jobsite conditions and providing a single source warranty.
Financial Integrity
As a subsidiary of Quest Chemical, Hydro-
Description of warranty
Hydro-
1. The warranty assures that Owner that the roof system will not leak.
2. The warranty covers both the material, the roof system, and it warrants against leaks caused by the contractor’s original labor.
• If the material fails, Hydro-
• If the Contractor did not install the system correctly, Hydro-
3. The warranty can be for 10, 15 or 20 years and the warranty can be renewed at the conclusion of the warranty period, allowing for a lifetime sustainable warranty.
4. The Hydro-
5. If damaged (hurricanes or other actions) the Premium Coat System can be (in most cases) repaired.
Systems ability to support photovoltaic systems.
If Photovoltaic is installed at a later date, the supports for the PV system can penetrate through the Premium Coat System so that they can be secured to the substrate. The penetration can then be encapsulated with the Premium Coat System, without voiding the warranty.





Call for a free quote: 787-